Alternator - Remanufactured 13234R

AMPERAGE: 70

PULLEY DESIGN: S5

PLUG CLOCK: 3

Replace MFR: DENSO

note: 70A For 1991-90 Celica.. The 80A Version is the 13321. The Only Appearance Difference Between The 13234 and the 14611 is That the Battery Terminal Comes Out the Back on the 13234 Instead of Out the Side (14611). It May Be This Way For Clearance. If Not, The 14611 Should Interchange. The 13234 Uses a Regulator (NDenso #126000-0610) in Which the "L" Terminal is Not Designed to Output More Than a Very Small Amount of Current, But the Older Style "L" Output Terminal Regulator (ex: 126000-0400, as Found in the 14611) Will Work Here. The 13321 (80A) Will Also Fit Here, as it is the Same Basic Unit, Although the Rotor Shaft Diameter Varies, So the 13321 Must Have the Pulley Attached in Order to Interchange. Also, the 13338 (100211-7910) Will Fit Here - This Was Used in 1992 - And the Main Difference is That the 13338 Uses a "Load Response Control" Regulator, While the 13234 Does Not, Although Both Have Low "L" Terminal Output. See 13338 For More Information.

PLUG CODE: 280

DESIGN: IR/IF

VOLTAGE: 12

PULLEY GROOVE OD: 55

ROTATION: CW